WORX SD Semiautomatic Driver - Perfect for the Home or Apartment
By Mark J. Donovan
Check out this cool new driver tool from WORX. It looks like a pistol but in reality it's a small screw driver gun. The SD Semiautomatic driver can carry up to 6 different hex-shanked driver bits at any one time. So not only does it allow you to drive various screw head types, it also provides an integrated carrying case for the driver bits.
It's an excellent screw gun for small projects around the home or apartment. Whether you need to hang up a picture, assemble a new piece of furniture, tighten up screws on a kitchen or bathroom cabinet, or do some light electrical/plumbing work, the WORX SD Semiautomatic driver is perfect for the job.
The WORX Semiautomatic driver is lightweight and easy to use. Simply pull back the magazine cover and rotate the cartridge to the desired driver bit, close the magazine cover and it's ready to drive screws.
It runs off a built-in rechargeable 4V Lithium-ion battery so there is no dangling wire to worry about when using it.
The WORX WX254L SD Semi-Automatic Power Screw Driver with 12 Driving Bits costs $49.99 and you can find it at www.worx.com and at www.amazon.com.
Wednesday, November 21, 2012
WORX SD Semiautomatic Driver Screw Gun Product Review
Posted by
Unknown
at
6:40 AM
0
comments
Friday, November 09, 2012
New Home Construction and Room Addition Bid Sheets on Sale at HomeAdditionPlus.com
Posted by
Unknown
at
1:18 PM
0
comments
Monday, October 29, 2012
Preparing your Home for Hurricane Sandy
By Mark J. Donovan
With hurricane Sandy bearing down upon the eastern coast of the United States there are a number of things people can do to protect their homes and family from danger and disaster.
Stock the Cupboards with Food and Water
Make sure you have sufficient food and water to last up to 2 weeks. It may take that long to get electricity restored to your home if you lose power. Try to stock up on foods that don’t require cooking and are not perishable for at least a couple of weeks. Wash out your tubs and sinks and then fill them with fresh water. You may want to use a plastic liner in the tubs and sinks to hold the water.
Have Fresh Batteries, Flashlights, Candles, and AM/FM Radio Ready
Make sure you’ve stocked up on fresh batteries and that you’ve replaced the old batteries in your flashlights and AM/FM radios. Also keep candles and a lighter nearby.
Fuel Up
Make sure you have your grilles propane tank filled as you may have to resort to cooking on your gas grille. Also make sure to have your portable gas tanks full if you’re lucky enough to own a generator. Similarly, fill up your automobiles’ gas tanks.
Pick up Loose Items in the Yard
Pick up and store away in garages or sheds any children’s toys, patio furniture, and other yard items that could be blown away or destroyed by hurricane Sandy. You may also want to remove the grille cover and store it away as well.
Charge Up Cell Phones
Make sure your cell phones are fully charged prior to the onslaught of hurricane Sandy, as your cell phones maybe your only form of communication to the outside world if the land lines get taken down by hurricane Sandy’s high winds.
Check the Generator
If you own a generator check the oil and gasoline in it and start it up. If it doesn’t start or runs rough clean the spark plug and try again. Also have the generator wiring handy so that you can easily access it in the dark. Also, always make sure to operate the generator outside and at least 30 feet away from your home.
Have Cash on Hand
Often during natural disasters banks and ATM machines are not open or not operational. Consequently it’s a wise idea to have some cash on hand to make emergency purchases.
Posted by
Unknown
at
9:42 AM
0
comments
Friday, October 26, 2012
Purpose of Ice and Water Shield
By Mark J. Donovan
I often get asked what exactly is Ice and Water Shield. When I first started receiving this question I was somewhat shocked that people were unaware of this roofing product. Ice and water shield has been a godsend in the housing industry for years now. It is used for protecting homes and roofs from water and ice damage and every responsible builder and roofer uses it today.
So what is ice and water shield? Simply put, it is a flexible and sticky membrane that is
placed on the roof sheathing prior to installing the shingles. This membrane seals up
leak-tight around roofing nails that puncture it. It is used mainly along the roof
edges and in the valleys, and along walls or chimneys to protect against ice dams and water seeping underneath flashing.
Ice and water shield is commonly sold in 3 foot width rolls. Typically one or two courses of it is installed along the roof eaves to achieve 3 to 6 feet of coverage. In the roof valleys it is usually positioned so that there is about 18 inches of coverage on either side of the valley. Where a roof abuts a wall the ice and water shield is typically installed up the wall 6 to 18 inches. House siding is then installed over it.
So if you are having your roof reshingled make sure that the roofing contractor includes the installation of ice and water shield in the quote.
Posted by
Unknown
at
12:37 PM
1 comments
Installation of a Fiberon Composite Deck Railing System
By Mark J. Donovan
This weekend I visited a home improvement center looking for a new deck railing system for my home’s deck. After checking out several deck railing systems I’ve decided to use Fiberon’s composite deck railing system. The composite railing system pieces are constructed using a PVC core with a very hard PVC finish that resists scratching and fading. I plan to install the Fiberon deck railing system in the next few weeks, while the particular home improvement center is offering a 10% sale on all decking materials. This is the time of the year to get deck material discounts, so if you have a deck project in mind you may want to find out if you can get similar price saving deals at your local home improvement center for your deck project.
The composite deck railing kits from Fiberon come in a couple of different standard lengths, e.g. 6 and 8 feet. Each kit comes with top and bottom rails, balusters, and the hardware to assemble them. You can also trim the standard lengths to the required widths. They also have a special railing kit for stairs. In addition, I needed to buy post sleeves, cap, and skirts. For a 12x10 deck I calculated the total cost of the Fiberon deck rail system to be about $550.
I’ll be sure to write about the project when I complete it, as well as take plenty of pictures and a video or two during the deck construction. So check back to see how the project went and to see the finished look.
Posted by
Unknown
at
12:35 PM
0
comments

